Review the Bell & Ross BR X2 Skull Tourbillon Sapphire Watch Replica

Review the Bell & Ross BR X2 Skull Tourbillon Sapphire Watch Replica

French watch manufacturer Bell & Ross once introduced Bell & Ross BR-X1 Skull Tourbillon Sapphire replica. The BR X1 has a miniature rotor and a flying tourbillon decorated with an ampersand, and not only a sapphire sandwich. The brand-new Bell & Ross BR-X1 Skull Tourbillon Sapphire 45 mm watch replica BRX1-SKTB-SAPHIR is like the combination of the two functions, but it is different because it uses the BR-X1 case assembled from five carefully carved sapphire blocks.

The Dial

Although not as complicated as its predecessor, the Chrono Tourbillon, this new replica Bell & Ross BR-X1 Skeleton Tourbillon Sapphire is in some ways even more attractive due to its minimalist design. What you see before you are only the bare essentials. The hours and minutes are displayed on an off-centre, open-worked dial at 12 o’clock, which features Superluminova indices and skeletonized Superluminova-filled hour and minutes hands. At 6 o’clock a flying tourbillon appears to float, suspended in the middle of the case from the skeletonized bridge.

The Case

All of this is housed in an instantly recognisable, square-shaped case measuring 45mm. Constructed from 5 sapphire blocks, each has been carefully carved before being delicately assembled with screws. Given sapphire’s reputation for being challenging to work with, I am sure more than a few blocks were discarded during both the manufacturing and the assembly process. As they say, perfection comes at a price, and with a completely transparent case you can’t really hide any mistakes. Completing the look is a translucent rubber strap, with a satin-polished steel pin, which is quite comfortable on the wrist.

The Movement

The steely gray lines of the 3Hz manually-wound BR-CAL.288 movement architecture cast a nicely skeletonized, industrial contrast against all the translucent elements on the watch – even the strap is translucent rubber, which should make for some interesting wrist shots. Part of the idea, besides the novelty itself of a totally transparent case, is that the movement and even the screws holding the case together are visible from about every angle. The only part of the Bell & Ross BR-X1 watch replica that isn’t fully see-through is the large mainspring barrel itself, which provides 100 hours of power reserve, and is tucked conveniently behind the luminous hour and minute hands at 12:00, preserving some degree of legibility for timekeeping.

Technical Specifications

Case: 45mm – 5-piece sapphire case – sapphire crystal on both sides

Movement: BR-CAL.288 with flying tourbillon escapement – manual-winding – 3Hz frequency – 100h power reserve – hours, minutes, flying tourbillon

Strap: Translucent rubber strap

Reference: BRX1-SKTB-SAPHIR replica

Availability: October 2017

Limited Edition: 8 pieces

We can assure that every replica watch selling on our store was AAA quality and new, all watches need be test 2 days befor we send out to make sure work perfect, powered by Asian high imitated movement, use the material closest to the original,100% detail, origianl box(need add $25), and the SSL secure payment with fast shipping, 24*7 Email support, all of our quality services provided by our honesty website. Read more from https://chiwatches.blogspot.com/2021/04/review-bell-ross-br-x2-skull-tourbillon.html.